To figure out whether or not your wood floors are over and done with past a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is govern your hand higher than the wood. If you can setting the texture of the grain, the 4 X 36 Vinyl Plank Flooring has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, tainted past additives for drying) topped past wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, past polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the 4 X 36 Vinyl Plank Flooring is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after not quite 10 to 15 minutes, the floors are hermetically sealed past wax. To surgically remove the white spots, use a fragment of fine steel wool lightly dampened past wax and rub gently. The last is if you suspect a varnish or shellac, endure a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed past one of the older ability methods, it will flake off.