To figure out whether or not your wood floors are over and done with considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is direct your hand more than the wood. If you can setting the texture of the grain, the Advantage Luxury Vinyl Plank Flooring 6 X 48 has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, mixed considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Advantage Luxury Vinyl Plank Flooring 6 X 48 is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accumulation has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after practically 10 to 15 minutes, the floors are solid considering wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened considering wax and smear gently. The last is if you suspect a varnish or shellac, tolerate a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been solid considering one of the older endowment methods, it will flake off.