The Best Home Improvement Ideas > Floor > Award Hardwood Floors

Award Hardwood Floors



Award Hardwood Floors

To figure out whether or not your wood floors are the end taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion center suggests these tests: First is govern your hand higher than the wood. If you can feel the texture of the grain, the Award Hardwood Floors has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, dirty taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Award Hardwood Floors is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after more or less 10 to 15 minutes, the floors are unassailable taking into consideration wax. To sever the white spots, use a fragment of fine steel wool lightly dampened taking into consideration wax and smear gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unassailable taking into consideration one of the older finishing methods, it will flake off.