To figure out whether or not your wood floors are curtains in the manner of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is control your hand over the wood. If you can vibes the texture of the grain, the Bamboo Flooring Below Grade has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, contaminated in the manner of additives for drying) topped in the manner of wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, in the manner of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Bamboo Flooring Below Grade is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after about 10 to 15 minutes, the floors are sealed in the manner of wax. To sever the white spots, use a fragment of fine steel wool lightly dampened in the manner of wax and massage gently. The last is if you suspect a varnish or shellac, admit a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sealed in the manner of one of the older achievement methods, it will flake off.