To figure out whether or not your wood floors are finished subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is manage your hand higher than the wood. If you can quality the texture of the grain, the Bamboo Flooring Expensive has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, contaminated subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads in the works and does not soak into the wood, the finish upon the Bamboo Flooring Expensive is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accumulation has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after just about 10 to 15 minutes, the floors are strong subsequent to wax. To sever the white spots, use a piece of good steel wool lightly dampened subsequent to wax and rub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been strong subsequent to one of the older realization methods, it will flake off.