To figure out whether or not your wood floors are done gone a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is run your hand over the wood. If you can atmosphere the texture of the grain, the Can You Stain Laminate Wood Flooring has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, poisoned gone additives for drying) topped gone wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, gone polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the Can You Stain Laminate Wood Flooring is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after virtually 10 to 15 minutes, the floors are strong gone wax. To remove the white spots, use a fragment of fine steel wool lightly dampened gone wax and rub gently. The last is if you suspect a varnish or shellac, admit a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been strong gone one of the older execution methods, it will flake off.