To figure out whether or not your wood floors are the end subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is govern your hand on top of the wood. If you can mood the texture of the grain, the Commercial Kitchen Flooring Yorkshire has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, poisoned subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Commercial Kitchen Flooring Yorkshire is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective buildup has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after just about 10 to 15 minutes, the floors are sealed subsequent to wax. To remove the white spots, use a fragment of fine steel wool lightly dampened subsequent to wax and smooth gently. The last is if you suspect a varnish or shellac, understand a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been sealed subsequent to one of the older completion methods, it will flake off.