To figure out whether or not your wood floors are over and done with subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is run your hand on top of the wood. If you can tone the texture of the grain, the Epoxy Flooring Cost In India has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, impure subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Epoxy Flooring Cost In India is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after virtually 10 to 15 minutes, the floors are solid subsequent to wax. To separate the white spots, use a piece of fine steel wool lightly dampened subsequent to wax and rub gently. The last is if you suspect a varnish or shellac, admit a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been solid subsequent to one of the older skill methods, it will flake off.