To figure out whether or not your wood floors are finished subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information center suggests these tests: First is control your hand more than the wood. If you can setting the texture of the grain, the Epoxy Flooring Durability has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, mixed subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Epoxy Flooring Durability is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after nearly 10 to 15 minutes, the floors are hermetically sealed subsequent to wax. To remove the white spots, use a fragment of fine steel wool lightly dampened subsequent to wax and smear gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed subsequent to one of the older expertise methods, it will flake off.