To figure out whether or not your wood floors are curtains with a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is direct your hand exceeding the wood. If you can atmosphere the texture of the grain, the Epoxy Flooring Georgia has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, infected with additives for drying) topped with wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, with polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Epoxy Flooring Georgia is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after approximately 10 to 15 minutes, the floors are unassailable with wax. To separate the white spots, use a fragment of fine steel wool lightly dampened with wax and daub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unassailable with one of the older achievement methods, it will flake off.