To figure out whether or not your wood floors are ended subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is rule your hand more than the wood. If you can air the texture of the grain, the Epoxy Flooring Lowes has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, contaminated subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads in the works and does not soak into the wood, the finish upon the Epoxy Flooring Lowes is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after practically 10 to 15 minutes, the floors are hermetically sealed subsequent to wax. To separate the white spots, use a fragment of fine steel wool lightly dampened subsequent to wax and daub gently. The last is if you suspect a varnish or shellac, resign yourself to a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed subsequent to one of the older achievement methods, it will flake off.