To figure out whether or not your wood floors are the end behind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is govern your hand greater than the wood. If you can mood the texture of the grain, the Epoxy Flooring Nashville Tn has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, contaminated behind additives for drying) topped behind wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, behind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Epoxy Flooring Nashville Tn is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after nearly 10 to 15 minutes, the floors are hermetic behind wax. To cut off the white spots, use a fragment of good steel wool lightly dampened behind wax and rub gently. The last is if you suspect a varnish or shellac, allow a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been hermetic behind one of the older triumph methods, it will flake off.