To figure out whether or not your wood floors are ended subsequently a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance center suggests these tests: First is manage your hand exceeding the wood. If you can air the texture of the grain, the Epoxy Flooring Niagara has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, infected subsequently additives for drying) topped subsequently wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequently polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish on the Epoxy Flooring Niagara is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after just about 10 to 15 minutes, the floors are unquestionable subsequently wax. To sever the white spots, use a piece of good steel wool lightly dampened subsequently wax and smooth gently. The last is if you suspect a varnish or shellac, take a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unquestionable subsequently one of the older carrying out methods, it will flake off.