To figure out whether or not your wood floors are the end in the manner of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is manage your hand beyond the wood. If you can mood the texture of the grain, the Epoxy Flooring Townsville has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, tainted in the manner of additives for drying) topped in the manner of wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, in the manner of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Epoxy Flooring Townsville is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after just about 10 to 15 minutes, the floors are strong in the manner of wax. To remove the white spots, use a piece of fine steel wool lightly dampened in the manner of wax and massage gently. The last is if you suspect a varnish or shellac, tolerate a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been strong in the manner of one of the older completion methods, it will flake off.