To figure out whether or not your wood floors are curtains bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is manage your hand over the wood. If you can tone the texture of the grain, the Floor Tile Edging has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, poisoned bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Floor Tile Edging is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after approximately 10 to 15 minutes, the floors are solid bearing in mind wax. To sever the white spots, use a fragment of good steel wool lightly dampened bearing in mind wax and massage gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been solid bearing in mind one of the older completion methods, it will flake off.