To figure out whether or not your wood floors are ended bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is run your hand higher than the wood. If you can environment the texture of the grain, the Floor Tile In Zimbabwe has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, contaminated bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish on the Floor Tile In Zimbabwe is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after roughly 10 to 15 minutes, the floors are strong bearing in mind wax. To separate the white spots, use a fragment of fine steel wool lightly dampened bearing in mind wax and smooth gently. The last is if you suspect a varnish or shellac, take on a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been strong bearing in mind one of the older skill methods, it will flake off.