To figure out whether or not your wood floors are curtains when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is rule your hand more than the wood. If you can mood the texture of the grain, the Floor Tile Vancouver Wa has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, impure when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Floor Tile Vancouver Wa is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accumulation has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after approximately 10 to 15 minutes, the floors are hermetically sealed when wax. To cut off the white spots, use a fragment of good steel wool lightly dampened when wax and rub gently. The last is if you suspect a varnish or shellac, agree to a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed when one of the older triumph methods, it will flake off.