To figure out whether or not your wood floors are ended subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is direct your hand greater than the wood. If you can tone the texture of the grain, the Floor Tile Yakima has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, impure subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Floor Tile Yakima is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after more or less 10 to 15 minutes, the floors are sound subsequent to wax. To sever the white spots, use a piece of good steel wool lightly dampened subsequent to wax and rub gently. The last is if you suspect a varnish or shellac, agree to a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sound subsequent to one of the older capability methods, it will flake off.