To figure out whether or not your wood floors are curtains subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is rule your hand on top of the wood. If you can feel the texture of the grain, the Floor Tile Yuma Az has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, poisoned subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish on the Floor Tile Yuma Az is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after more or less 10 to 15 minutes, the floors are unassailable subsequent to wax. To sever the white spots, use a piece of good steel wool lightly dampened subsequent to wax and massage gently. The last is if you suspect a varnish or shellac, resign yourself to a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been unassailable subsequent to one of the older deed methods, it will flake off.