To figure out whether or not your wood floors are curtains taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is rule your hand on top of the wood. If you can tone the texture of the grain, the Free House Floor Plans New Zealand has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, poisoned taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Free House Floor Plans New Zealand is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after roughly 10 to 15 minutes, the floors are unassailable taking into account wax. To separate the white spots, use a fragment of fine steel wool lightly dampened taking into account wax and smooth gently. The last is if you suspect a varnish or shellac, put up with a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unassailable taking into account one of the older success methods, it will flake off.