To figure out whether or not your wood floors are the end later than a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is govern your hand higher than the wood. If you can quality the texture of the grain, the Garage Floor Paint Colors Ideas Craftsman Expansive has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, unclean later than additives for drying) topped later than wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, later than polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish on the Garage Floor Paint Colors Ideas Craftsman Expansive is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after virtually 10 to 15 minutes, the floors are unassailable later than wax. To sever the white spots, use a fragment of fine steel wool lightly dampened later than wax and massage gently. The last is if you suspect a varnish or shellac, take on a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unassailable later than one of the older success methods, it will flake off.