To figure out whether or not your wood floors are ended in the manner of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is control your hand over the wood. If you can feel the texture of the grain, the Garage Flooring Boise has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, dirty in the manner of additives for drying) topped in the manner of wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, in the manner of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Garage Flooring Boise is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective buildup has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after not quite 10 to 15 minutes, the floors are unquestionable in the manner of wax. To separate the white spots, use a piece of good steel wool lightly dampened in the manner of wax and smooth gently. The last is if you suspect a varnish or shellac, resign yourself to a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been unquestionable in the manner of one of the older realization methods, it will flake off.