To figure out whether or not your wood floors are over and done with bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is direct your hand greater than the wood. If you can air the texture of the grain, the Garage Flooring Costco Uk has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, impure bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Garage Flooring Costco Uk is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after not quite 10 to 15 minutes, the floors are sealed bearing in mind wax. To remove the white spots, use a piece of good steel wool lightly dampened bearing in mind wax and smear gently. The last is if you suspect a varnish or shellac, say yes a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sealed bearing in mind one of the older talent methods, it will flake off.