To figure out whether or not your wood floors are curtains taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is rule your hand beyond the wood. If you can environment the texture of the grain, the Garage Flooring Dfw has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, poisoned taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Garage Flooring Dfw is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after about 10 to 15 minutes, the floors are unquestionable taking into account wax. To sever the white spots, use a piece of fine steel wool lightly dampened taking into account wax and smooth gently. The last is if you suspect a varnish or shellac, take a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unquestionable taking into account one of the older carrying out methods, it will flake off.