To figure out whether or not your wood floors are curtains considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is govern your hand greater than the wood. If you can character the texture of the grain, the Garage Flooring Glasgow has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, infected considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Garage Flooring Glasgow is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accumulation has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after just about 10 to 15 minutes, the floors are unassailable considering wax. To cut off the white spots, use a fragment of fine steel wool lightly dampened considering wax and massage gently. The last is if you suspect a varnish or shellac, assume a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unassailable considering one of the older finishing methods, it will flake off.