To figure out whether or not your wood floors are ended taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is govern your hand beyond the wood. If you can vibes the texture of the grain, the Garage Flooring Halfords has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, poisoned taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Garage Flooring Halfords is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective buildup has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after very nearly 10 to 15 minutes, the floors are hermetically sealed taking into consideration wax. To sever the white spots, use a piece of good steel wool lightly dampened taking into consideration wax and rub gently. The last is if you suspect a varnish or shellac, agree to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed taking into consideration one of the older realization methods, it will flake off.