To figure out whether or not your wood floors are over and done with in imitation of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is manage your hand higher than the wood. If you can atmosphere the texture of the grain, the Garage Flooring Home Depot Canada has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, infected in imitation of additives for drying) topped in imitation of wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, in imitation of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish on the Garage Flooring Home Depot Canada is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after about 10 to 15 minutes, the floors are solid in imitation of wax. To surgically remove the white spots, use a fragment of good steel wool lightly dampened in imitation of wax and rub gently. The last is if you suspect a varnish or shellac, take a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been solid in imitation of one of the older deed methods, it will flake off.