To figure out whether or not your wood floors are ended when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is govern your hand higher than the wood. If you can quality the texture of the grain, the Garage Flooring Jay Leno has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, contaminated when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the Garage Flooring Jay Leno is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after very nearly 10 to 15 minutes, the floors are unquestionable when wax. To surgically remove the white spots, use a fragment of good steel wool lightly dampened when wax and daub gently. The last is if you suspect a varnish or shellac, endure a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unquestionable when one of the older feat methods, it will flake off.