To figure out whether or not your wood floors are the end gone a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is rule your hand on top of the wood. If you can mood the texture of the grain, the Garage Flooring Malta has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, mixed gone additives for drying) topped gone wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, gone polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish upon the Garage Flooring Malta is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after just about 10 to 15 minutes, the floors are unassailable gone wax. To remove the white spots, use a fragment of fine steel wool lightly dampened gone wax and smear gently. The last is if you suspect a varnish or shellac, endure a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unassailable gone one of the older carrying out methods, it will flake off.