To figure out whether or not your wood floors are finished when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is direct your hand exceeding the wood. If you can environment the texture of the grain, the Garage Flooring Montreal has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, poisoned when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Garage Flooring Montreal is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after more or less 10 to 15 minutes, the floors are strong when wax. To cut off the white spots, use a piece of fine steel wool lightly dampened when wax and massage gently. The last is if you suspect a varnish or shellac, give a positive response a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been strong when one of the older expertise methods, it will flake off.