To figure out whether or not your wood floors are curtains later a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion middle suggests these tests: First is manage your hand exceeding the wood. If you can air the texture of the grain, the Garage Flooring Repair has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, tainted later additives for drying) topped later wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, later polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Garage Flooring Repair is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after very nearly 10 to 15 minutes, the floors are sound later wax. To surgically remove the white spots, use a fragment of fine steel wool lightly dampened later wax and massage gently. The last is if you suspect a varnish or shellac, agree to a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sound later one of the older execution methods, it will flake off.