To figure out whether or not your wood floors are curtains taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information center suggests these tests: First is direct your hand higher than the wood. If you can tone the texture of the grain, the Garage Flooring Tiles Lowes has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, tainted taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Garage Flooring Tiles Lowes is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective lump has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after very nearly 10 to 15 minutes, the floors are sound taking into account wax. To surgically remove the white spots, use a fragment of good steel wool lightly dampened taking into account wax and daub gently. The last is if you suspect a varnish or shellac, take on a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sound taking into account one of the older finishing methods, it will flake off.