To figure out whether or not your wood floors are ended past a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is rule your hand exceeding the wood. If you can vibes the texture of the grain, the Garage Flooring Tiles Uk has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, infected past additives for drying) topped past wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, past polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Garage Flooring Tiles Uk is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after very nearly 10 to 15 minutes, the floors are solid past wax. To sever the white spots, use a fragment of good steel wool lightly dampened past wax and smooth gently. The last is if you suspect a varnish or shellac, say you will a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been solid past one of the older finishing methods, it will flake off.