To figure out whether or not your wood floors are done gone a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is rule your hand greater than the wood. If you can atmosphere the texture of the grain, the Garage Flooring Types has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, unclean gone additives for drying) topped gone wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, gone polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Garage Flooring Types is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after about 10 to 15 minutes, the floors are sound gone wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened gone wax and smear gently. The last is if you suspect a varnish or shellac, agree to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been sound gone one of the older feat methods, it will flake off.