To figure out whether or not your wood floors are finished bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is manage your hand beyond the wood. If you can atmosphere the texture of the grain, the Garage Flooring Versaroll has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, mixed bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Garage Flooring Versaroll is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after more or less 10 to 15 minutes, the floors are sound bearing in mind wax. To surgically remove the white spots, use a fragment of fine steel wool lightly dampened bearing in mind wax and smear gently. The last is if you suspect a varnish or shellac, say yes a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been sound bearing in mind one of the older exploit methods, it will flake off.