To figure out whether or not your wood floors are finished considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is control your hand greater than the wood. If you can character the texture of the grain, the Garage Flooring Victoria Bc has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, poisoned considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads in the works and does not soak into the wood, the finish upon the Garage Flooring Victoria Bc is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after virtually 10 to 15 minutes, the floors are unassailable considering wax. To surgically remove the white spots, use a fragment of fine steel wool lightly dampened considering wax and smear gently. The last is if you suspect a varnish or shellac, undertake a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been unassailable considering one of the older success methods, it will flake off.