To figure out whether or not your wood floors are over and done with considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion middle suggests these tests: First is control your hand higher than the wood. If you can character the texture of the grain, the House Floor Plans Under 1500 Sq Ft has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, impure considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish on the House Floor Plans Under 1500 Sq Ft is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after not quite 10 to 15 minutes, the floors are sound considering wax. To separate the white spots, use a fragment of good steel wool lightly dampened considering wax and massage gently. The last is if you suspect a varnish or shellac, receive a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sound considering one of the older endowment methods, it will flake off.