To figure out whether or not your wood floors are curtains taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is direct your hand greater than the wood. If you can air the texture of the grain, the House Floor Plans Vastu has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, polluted taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads up and does not soak into the wood, the finish on the House Floor Plans Vastu is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after more or less 10 to 15 minutes, the floors are unassailable taking into account wax. To sever the white spots, use a piece of fine steel wool lightly dampened taking into account wax and rub gently. The last is if you suspect a varnish or shellac, undertake a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been unassailable taking into account one of the older feat methods, it will flake off.