To figure out whether or not your wood floors are finished when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is run your hand greater than the wood. If you can mood the texture of the grain, the Kitchen Flooring Aberdeen has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, mixed when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish on the Kitchen Flooring Aberdeen is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after just about 10 to 15 minutes, the floors are solid when wax. To separate the white spots, use a fragment of fine steel wool lightly dampened when wax and massage gently. The last is if you suspect a varnish or shellac, understand a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been solid when one of the older carrying out methods, it will flake off.