To figure out whether or not your wood floors are ended following a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is govern your hand beyond the wood. If you can setting the texture of the grain, the Kitchen Flooring Derby has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, impure following additives for drying) topped following wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, following polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Kitchen Flooring Derby is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective lump has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after roughly 10 to 15 minutes, the floors are hermetic following wax. To remove the white spots, use a fragment of fine steel wool lightly dampened following wax and massage gently. The last is if you suspect a varnish or shellac, admit a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been hermetic following one of the older realization methods, it will flake off.