To figure out whether or not your wood floors are curtains afterward a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is direct your hand greater than the wood. If you can quality the texture of the grain, the Kitchen Flooring Most Popular has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, poisoned afterward additives for drying) topped afterward wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, afterward polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Kitchen Flooring Most Popular is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after virtually 10 to 15 minutes, the floors are strong afterward wax. To remove the white spots, use a piece of fine steel wool lightly dampened afterward wax and massage gently. The last is if you suspect a varnish or shellac, recognize a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong afterward one of the older attainment methods, it will flake off.