To figure out whether or not your wood floors are the end subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is govern your hand exceeding the wood. If you can vibes the texture of the grain, the Kitchen Flooring Over Linoleum has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, polluted subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish on the Kitchen Flooring Over Linoleum is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accumulation has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after not quite 10 to 15 minutes, the floors are hermetically sealed subsequent to wax. To remove the white spots, use a fragment of fine steel wool lightly dampened subsequent to wax and massage gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed subsequent to one of the older realization methods, it will flake off.