To figure out whether or not your wood floors are ended as soon as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion middle suggests these tests: First is manage your hand higher than the wood. If you can atmosphere the texture of the grain, the Kitchen Flooring Rochester Ny has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, dirty as soon as additives for drying) topped as soon as wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, as soon as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads going on and does not soak into the wood, the finish on the Kitchen Flooring Rochester Ny is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective buildup has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after very nearly 10 to 15 minutes, the floors are sound as soon as wax. To remove the white spots, use a piece of good steel wool lightly dampened as soon as wax and smooth gently. The last is if you suspect a varnish or shellac, consent a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been sound as soon as one of the older deed methods, it will flake off.