The Best Home Improvement Ideas > Floor > Kitchen Flooring Solutions

Kitchen Flooring Solutions



Kitchen Flooring Solutions

To figure out whether or not your wood floors are over and done with with a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion center suggests these tests: First is govern your hand higher than the wood. If you can setting the texture of the grain, the Kitchen Flooring Solutions has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, dirty with additives for drying) topped with wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, with polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Kitchen Flooring Solutions is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after roughly 10 to 15 minutes, the floors are strong with wax. To cut off the white spots, use a piece of fine steel wool lightly dampened with wax and daub gently. The last is if you suspect a varnish or shellac, bow to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been strong with one of the older success methods, it will flake off.