To figure out whether or not your wood floors are done taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation center suggests these tests: First is run your hand beyond the wood. If you can setting the texture of the grain, the Kitchen Flooring Styles has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, impure taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Kitchen Flooring Styles is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after practically 10 to 15 minutes, the floors are sound taking into account wax. To cut off the white spots, use a fragment of fine steel wool lightly dampened taking into account wax and rub gently. The last is if you suspect a varnish or shellac, assume a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sound taking into account one of the older exploit methods, it will flake off.