To figure out whether or not your wood floors are over and done with subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is manage your hand higher than the wood. If you can setting the texture of the grain, the Kitchen Flooring Wood Vs Tile has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, polluted subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Kitchen Flooring Wood Vs Tile is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after practically 10 to 15 minutes, the floors are strong subsequent to wax. To remove the white spots, use a piece of good steel wool lightly dampened subsequent to wax and rub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong subsequent to one of the older endowment methods, it will flake off.