To figure out whether or not your wood floors are curtains in the same way as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction middle suggests these tests: First is rule your hand on top of the wood. If you can air the texture of the grain, the Kitchen Flooring Yeovil has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, impure in the same way as additives for drying) topped in the same way as wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, in the same way as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Kitchen Flooring Yeovil is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after not quite 10 to 15 minutes, the floors are sealed in the same way as wax. To sever the white spots, use a fragment of fine steel wool lightly dampened in the same way as wax and smear gently. The last is if you suspect a varnish or shellac, resign yourself to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been sealed in the same way as one of the older finishing methods, it will flake off.