To figure out whether or not your wood floors are finished taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is direct your hand on top of the wood. If you can feel the texture of the grain, the Laminated Wooden Flooring Krugersdorp has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, poisoned taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish on the Laminated Wooden Flooring Krugersdorp is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after about 10 to 15 minutes, the floors are sound taking into account wax. To separate the white spots, use a fragment of fine steel wool lightly dampened taking into account wax and massage gently. The last is if you suspect a varnish or shellac, say you will a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sound taking into account one of the older success methods, it will flake off.