To figure out whether or not your wood floors are ended taking into account a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction center suggests these tests: First is govern your hand greater than the wood. If you can feel the texture of the grain, the Nora Rubber Flooring Qatar has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, impure taking into account additives for drying) topped taking into account wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, taking into account polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Nora Rubber Flooring Qatar is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective lump has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after not quite 10 to 15 minutes, the floors are sound taking into account wax. To cut off the white spots, use a fragment of fine steel wool lightly dampened taking into account wax and massage gently. The last is if you suspect a varnish or shellac, assume a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been sound taking into account one of the older achievement methods, it will flake off.