To figure out whether or not your wood floors are done taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is govern your hand higher than the wood. If you can atmosphere the texture of the grain, the Rubber Flooring Amazon has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, tainted taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish upon the Rubber Flooring Amazon is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after about 10 to 15 minutes, the floors are hermetically sealed taking into consideration wax. To sever the white spots, use a fragment of fine steel wool lightly dampened taking into consideration wax and daub gently. The last is if you suspect a varnish or shellac, assume a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed taking into consideration one of the older skill methods, it will flake off.